• Office Phone:
  • (718) 631-3333
  • Office Hours:
  • Mon - Sat: 9:00 AM to 12:00 PM  - Sun: Closed

EPA Lead Inspector Initial

EPA Logo

The USEPA Lead Inspector Initial is a 3 day (24-hour) training course that will teach the Students how to conduct Lead-based Paint Inspections and Surveys through the discussion of work practices, testing operations, the use of XRF analyzers, sampling, reporting and much more. Hands-on workshops included with the course consist of Lead-based Paint Inspection Methods; Lead-based Paint Sampling; Clearance Testing; and How to Prepare a Lead Paint Inspection Report.

Following the successful completion of this course, you will receive an Interim Course Completion Certificate which will allow you to work for a 6-month period as a Lead Inspector while you are completing the USEPA Application Process to receive your full 3-year license.

Event Information

Event Date 03-16-2026 9:00 am
Event End Date 03-18-2026 5:00 pm
Cut Off Date 03-15-2026
Individual Price $600.00
Location BVAC Rescue Response Training Center

Venue Information - BVAC Rescue Response Training Center

BVAC Rescue Response Training Center
214-29 42nd Ave
Bayside, NY 11361

Please note: We are located on the 2nd floor (no elevator).

Location

  • Conveniently located in the heart of Bayside, Queens

  • 1 block east of Bell Blvd on 42nd Ave
    (Cross streets: Bell Blvd & 214 Place)

  • Close to public transportation:

    • LIRR: Bayside Station

    • Bus: Q13, Q31, N20

    • About 2 blocks north of Northern Blvd

Parking

  • Metered street parking on 42nd Ave

    • $0.25 per 15 minutes

    • 2-hour limit

    • Free on Sundays

  • Bayside Municipal Parking Field: 41st Avenue & 214th Place, Bayside, NY 11361

  • Free street parking is often available one block past Bell Blvd (east or west)

Important: Do not park in the lot next to our building—vehicles will be towed or may be locked in.

Deposit / Payment Portal Note

If you place a deposit, the checkout process may briefly display the full course price as you’re redirected to the payment portal. Once you arrive at the portal, only the deposit amount will be charged, not the full price.

Agendas

EPA Lead Inspector Initial (English) 3 day course

Day 1: Introduction to Lead and Regulatory Framework

8:30 AM - 9:00 AM:

  • Registration and Welcome
    • Course overview
    • Introduction of instructors and participants

9:00 AM - 10:30 AM:

  • Module 1: Introduction to Lead and Its Hazards
    • Health effects of lead exposure
    • Sources of lead contamination
    • At-risk populations

10:30 AM - 10:45 AM:

  • Break

10:45 AM - 12:00 PM:

  • Module 2: Regulatory Framework and Requirements
    • Overview of federal and state regulations (TSCA, RCRA, etc.)
    • EPA’s Lead-Based Paint Program
    • Roles and responsibilities of a lead inspector

12:00 PM - 1:00 PM:

  • Lunch Break

1:00 PM - 2:30 PM:

  • Module 3: Lead-Based Paint Inspection
    • Definitions and inspection process
    • Pre-inspection planning
    • Visual assessment techniques

2:30 PM - 2:45 PM:

  • Break

2:45 PM - 4:30 PM:

  • Module 4: Testing Methods
    • XRF (X-Ray Fluorescence) Analyzers
    • Paint chip sampling
    • Understanding laboratory analysis
    • Hands-on equipment demonstration

4:30 PM - 5:00 PM:

  • Q&A Session
    • Recap of the day’s learning
    • Open discussion and questions

Day 2: Advanced Lead Inspection Techniques and Hands-on Practice

8:30 AM - 9:00 AM:

  • Review of Day 1 and Q&A

9:00 AM - 10:30 AM:

  • Module 5: Soil, Dust, and Water Sampling
    • Procedures for collecting samples
    • Standards and clearance levels
    • Interpreting sample results

10:30 AM - 10:45 AM:

  • Break

10:45 AM - 12:00 PM:

  • Module 6: Lead Hazard Risk Assessment
    • Difference between inspection and risk assessment
    • Conducting risk assessments
    • Writing risk assessment reports

12:00 PM - 1:00 PM:

  • Lunch Break

1:00 PM - 2:30 PM:

  • Module 7: Hands-on Practice – Part 1
    • Simulated lead inspection scenarios
    • Using XRF analyzers and collecting samples
    • Documentation and record-keeping

2:30 PM - 2:45 PM:

  • Break

2:45 PM - 4:30 PM:

  • Module 8: Hands-on Practice – Part 2
    • Continuation of hands-on exercises
    • Group discussions on findings
    • Instructor feedback on performance

4:30 PM - 5:00 PM:

  • Q&A Session
    • Recap of the day’s learning
    • Open discussion and questions

Day 3: Reporting, Compliance, and Examination

8:30 AM - 9:00 AM:

  • Review of Day 2 and Q&A

9:00 AM - 10:30 AM:

  • Module 9: Reporting and Documentation
    • Preparing lead inspection reports
    • Record-keeping requirements
    • Compliance with EPA and state guidelines

10:30 AM - 10:45 AM:

  • Break

10:45 AM - 12:00 PM:

  • Module 10: Legal and Ethical Considerations
    • Legal responsibilities of lead inspectors
    • Ethical issues in lead inspection
    • Case studies and examples

12:00 PM - 1:00 PM:

  • Lunch Break

1:00 PM - 2:30 PM:

  • Module 11: Review Session
    • Review of key concepts and regulations
    • Preparation for the final exam
    • Mock exam questions and discussion

2:30 PM - 2:45 PM:

  • Break

2:45 PM - 4:00 PM:

  • Final Examination
    • Written test covering all course material

4:00 PM - 4:30 PM:

  • Grading and Feedback
    • Examination results and feedback
    • Certification information and next steps

4:30 PM - 5:00 PM:

  • Course Wrap-Up
    • Final Q&A
    • Course evaluation
    • Issuance of certificates

This agenda covers key topics for a lead inspector course, including regulatory knowledge, hands-on practice, and legal considerations. Adjustments can be made based on specific needs or regulatory requirements. Subject to change.

Resources

Quick Links

Contact Us

Headquarters:
214-29 42nd Avenue

Bayside, New York 11361

Mailing Address:
214-29 42nd Avenue

Bayside, New York 11361

Phone: + 1 (718) 631-3333
Contact Form

Image

Subscribe to our Mailing List

* indicates required